Consumers Union Wants Heavy-duty Truck Buyers to Know Their Vehicle’s Fuel Economy
Say you’re on the Ram website, perusing a new 2500 heavy-duty pickup. On the specifications page, you scroll down to the fuel efficiency table to see how many Andrew Jacksons you’ll be forking over at the pumps. The verdict? The Ram 2500 has a 32-gallon fuel tank. Thank you for visiting.
Unlike passenger cars and light duty trucks, heavy-duty trucks with a gross vehicle weight above 8,500 pounds aren’t required to flash fuel economy data on a window sticker. Searching the fueleconomy.gov database turns up nothing in the way of information. Now, Consumers Union wants Congress to change that. The consumer advocacy group is calling on the federal government to place fuel economy information on window stickers for the benefit of large truck buyers.
As it awaits a response, the group’s Consumer Reports publication went ahead and tested some heavy-duty pickups.
“Even though the Environmental Protection Agency collects data from automakers on heavy-duty pickup truck emissions and fuel economy, it has never mandated that the results be made available to the public, largely for budgetary reasons,” Consumer Reports states in the intro to its test.
The results of the tests, which differ from the EPA’s testing standard, aren’t shocking. The considerable heft of the brawny trucks impacts fuel economy when compared to smaller pickups, despite the inherent fuel-saving advantages of a diesel engine. Put through the paces were 2017 model year Chevrolet Silverado 2500HD, Ford F-250, and Ram 2500 trucks, plus the tweener Nissan Titan HD.
Unloaded, and with nothing hanging off the rear trailer hitch, the Silverado HD equipped with a 6.6-liter Duramax diesel V8 returned a combined 14 miles per gallon. That’s 2 mpg less than CR recorded in a 5.3-liter Silverado 1500.
The 6.7-liter diesel Ford F-250, also unencumbered with the things people buy heavy-duty trucks for, returned 15 mpg, or 2 mpg less than an F-150 equipped with a 2.7-liter Ecoboost V6. The 6.7-liter inline-six diesel Ram 2500 saw 14 mpg in the CR test, and the 5.0-liter diesel V8-powered Titan HD returned 15 mph. Naturally, these figures were lower than that of a light-duty pickup from the same brand.
Of course, most consumers are using heavy-duty trucks for heavy-duty work, and most aren’t likely to see such economy when towing that fifth-wheel or horse trailer or load of gravel. It’s because these trucks are usually, but increasingly less likely to be used for serious work that the EPA keeps the information to itself.
Currently, the information collected from the vehicles reflects the truck’s purpose. As such, heavy-duty trucks are rated in gallons per ton mileÂ â€” the fuel consumed while transporting a ton of cargo one mile. City, highway, and combined figures do not apply, nor does the truck’s thirstiness while unladen.
Speaking to Automotive News, David Friedman, director of cars and product policy and analysis at Consumers Union, admitted that posting the results of the EPA test could be misleading for buyers.
“Everyone knows that the certification tests are pretty gentle and there’s a gap between real-world use,” Friedman said. “So, if, and when, they put out certification numbers, they will probably overestimate fuel economy. But we believe consumers are better off with some data than no data.”
Before the EPA and National Highway Traffic Safety Administration (NHTSA) move forward with the group’s request, if indeed the agencies ever plan to, extra funds are needed to bolster the necessary manpower, Consumers Union claims.
[Image: Ford Motor Company]
auto stories,Royal news
via The Truth About Cars http://ift.tt/Jh8LjA
September 23, 2017 at 12:46PM